The measurement of the item from side to side.

Width

The measurement of the item from the very front to the very back.

Depth

The overall measurement of the item from the floor to its highest point (how tall the item is).

Height

Receivers & Amplifiers

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

Robust and efficient amplification, designed to complement Crestron Avia™ Digital Signal Processors.

Crestron® 2 Channel Power Amplifier

The Crestron® AMP-2800 amplifier is designed to complement the Crestron Avia™ family of Digital Signal Processors, and is well-suited for all types of commercial audio applications. The AMP-2800 furnishes two channels of clean, efficient amplification in a space-saving 1 RU rack-mountable chassis. Each channel is configurable for Lo-Z or Hi-Z operation, as well as stereo and bridged modes. Network connectivity enables configuration, monitoring, and control via the Crestron Avia Audio Tool software, a Crestron control system, Crestron XiO Cloud™ service, or Crestron Fusion® software.

The AMP-2800 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. The internal universal power supply with power factor correction ensures consistent performance with varying line voltages.

The AMP-2800 features professional balanced inputs that support input signal levels up to +24 dBu. Rear panel input attenuation controls allow for signal level matching. Remote level control and monitoring is enabled using the Crestron Avia Audio Tool software, or using a touch screen control panel or mobile device through integration with a Crestron control system. Integration with a control system also enables centralized monitoring and control of multiple amplifiers throughout a facility as part of a Crestron Fusion or Crestron XiO Cloud managed enterprise.

The AMP-2800 delivers 800 watts per channel into 4 or 8 ohm “Lo-Z” loads. Each channel is individually configurable via software for use with “Hi-Z” distributed speaker systems (either 70V or 100V). The amplifier can also be configured for stereo or 8 ohm bridged mono operation. Stereo mode enables remote control of a stereo pair of speakers using a single set of controls. Bridged mode allows two channels to be combined to provide a single channel delivering up to 1200 watts into 8 ohms.

Each output channel can be independently configured to throttle the amount of power delivered to connected loudspeakers. Power throttling can be used to protect connected loudspeakers from receiving too much power, making the AMP-2800 a software configurable power amplifier with up to 800 Watts per channel.

The power throttle can also be used for output load balancing. This is useful when mixing different loudspeaker types on adjacent channels such as a subwoofer that requires continuously high power versus a high frequency compression driver with a much lower power requirement. Using Power throttle, the output of the amplifier is provisioned to match the loudspeaker and line drive requirements. Amplifier gain is automatically adjusted such that a 0dBu input will yield the selected power throttle output level. No matter the gain from head-end equipment feeding the amplifier, power throttle will consistently provide an extra level of loudspeaker protection and overall system optimization.

The AMP-2800 features comprehensive protection against overheating, shorted or overloaded speaker lines, excessive signal levels, and other faults. Each channel is independently protected, allowing an individual channel to enter protection mode without interrupting the operation of the other channel. Protection is automatic, quickly disconnecting the speaker line and shutting down the affected channel, and then restoring normal operation once the fault is resolved. Clear indication of any fault is provided on the front panel, and may also be reported to a control system to provide notification on a touch screen or mobile device, through a text message or e-mail, or at a central help desk using Crestron Fusion software or the Crestron XiO Cloud service.

800 watts per channel @ 4/8 Ohms or 70/100V

Each channel configurable for Lo-Z or Hi-Z operation

Supports 100V to 240V AC line power with 4/8Ω or 70V / 100V output

Comprehensive fault and speaker protection per channel

Extensive front panel status indicators and output meters

Software configuration, control, and monitoring

Crestron® control system integration support

Crestron Fusion® enterprise management support

Rear panel +24 dBu balanced inputs and level adjustments

Detachable terminal block connectors for easy servicing

High-density stackable without extra vent spacing

Crestron® 4 Channel Power Amplifier

The Crestron® AMP-4600 amplifier is designed to complement the Crestron Avia™ family of digital signal processors, and is well-suited for all types of commercial audio applications. The AMP-4600 furnishes four channels of clean, efficient amplification in a space-saving 1 RU rack-mountable chassis. Each channel is configurable for Lo-Z or Hi-Z operation, as well as stereo and bridged modes. Network connectivity enables configuration, monitoring, and control via the Avia Audio Tool software, a Crestron control system, Crestron XiO Cloud™ service, or Crestron Fusion® software.

The AMP-4600 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply with power factor correction ensures consistent performance with varying line voltages.

The AMP-4600 features professional balanced inputs that support input signal levels up to +24 dBu. Rear panel input attenuation controls allow for signal level matching. Remote level control and monitoring is enabled using the Avia Audio Tool software, or using a touch screen control panel or mobile device through integration with a Crestron control system. Integration with a control system also enables centralized monitoring and control of multiple amplifiers throughout a facility as part of a Crestron Fusion or Crestron XiO Cloud managed enterprise.

The AMP-4600 delivers 600 watts per channel into 4 or 8 ohm “Lo-Z” loads. Each channel is individually configurable via software for use with “Hi-Z” distributed speaker systems (either 70V or 100V). Adjacent pairs of channels may be configured for stereo or bridged operation. Stereo mode enables remote control of a stereo pair of speakers using a single set of controls. Bridged mode allows two channels to be combined to provide a single channel delivering up to 1200 watts into 8 ohms.

Each output channel can be independently configured to throttle the amount of power delivered to connected loudspeakers. Power throttling can be used to protect connected loudspeakers from receiving too much power.

The AMP-4600 features comprehensive protection against overheating, shorted or overloaded speaker lines, excessive signal levels, and other faults. Each channel is independently protected, allowing an individual channel to enter protection mode without interrupting the operation of other channels. Protection is automatic, quickly disconnecting the speaker line and shutting down the affected channel, and then restoring normal operation once the fault is resolved. Clear indication of any fault is provided on the front panel, and may also be reported to a control system to provide notification on a touch screen or mobile device, through a text message or e-mail, or at a central help desk using Crestron Fusion software or the Crestron XiO Cloud service.

600 watts per channel @ 4/8 Ohms or 70/100V

The AMP-X300 provides a professional amplifier solution for commercial applications that saves energy, space, and money. The modular design is easy to configure and ships with everything required to enable surface mounting, rack mounting, and ganging mult

Crestron® X Series 4 Channel Amplifier

The Crestron® AMP-X300 is a high performance, space saving, energy efficient, professional grade amplifier solution that’s totally configurable, yet simple to use. Whether you need a stereo amp that mounts on a wall or under a table, or a multichannel rack mount amp with multiple output types and power levels, the AMP-X300 is simple to specify and install in any configuration.

LoZ (4/8 Ω) and Hi-Z (70 V or 100 V) Output

The AMP-X300 is a 4-channel amplifier (at 75 W per channel) which can also be configured for 2-channel bridged operation (at 150 W per channel), or 1 channel bridged operation (at 300 W), with a choice of “LoZ” outputs to drive 4- or 8-Ohm speakers, or “Hi-Z” outputs to drive a distributed speaker system (70 V or 100 V). Balanced and unbalanced inputs are provided for connection to two stereo or four mono source(s) via detachable terminal blocks or RCA connectors.

The AMP-X300 was designed in partnership with ICEpower to create a custom, flexible, high performance amplifier topology that is suitable for a variety of audio applications.

The AMP-X300 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply ensures consistent performance at varying line voltages.

The efficient design ensures cool running operation and long term reliability. The AMP-X300 is high-density stackable with other Crestron modular amps, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.

The AMP-X300 is housed in a half-width rack-mountable form factor that can be installed individually or ganged together in a single rack space. The amplifier ships complete with all the hardware required for installation. Rack and surface mount parts are included, so there are no other mounting accessories or rack shelves to purchase.

Whether mounting in a rack, attaching to a flat surface, or placing on a shelf, it’s easy to combine two amplifiers into a single assembly.

The AMP-X300 features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line or overheating condition, both outputs mute automatically until the fault condition is resolved. In the event of a prolonged fault, such as an internal component failure, the outputs mute instantly and the amplifier shuts down.

1 RU high design is surface or rack mountable

Half-rack width form factor, gangable with other next generation half-rack width form factor products

Configurable for either LoZ (4/8 Ω) or Hi-Z (70 V or 100 V) operation

Configurable for 4 x 75 W output, 2 x 150 W output, 1 x 300 W (bridged) output, and 2 x 75 W + 1 x 150 W (bridged) output

Designed in partnership with ICEpower to create a high performance amplifier with the latest technology

Comprehensive fault and speaker protection

Captive speaker connectors for secure and robust connectivity

Standby feature instantly turns on amplifier when input sensing circuitry detects an audio signal

Always On feature allows constant on connection with very low power consumption

Front panel power/standby, fault, and signal/clip indicators

Internal universal 100-240 V power supply

The AMP-X300 provides a professional amplifier solution for commercial applications that saves energy, space, and money. The modular design is easy to configure and ships with everything required to enable surface mounting, rack mounting, and ganging multiple units together.

A compact, efficient stereo amplifier for media presentation systems.

Crestron® X Series 2 Channel Media Presentation Amplifier

The Crestron® AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface‑mountable design that installs virtually anywhere without requiring an equipment rack.

High-efficiency Class D circuitry delivers 25 W per channel to drive one pair of 4 or 8 Ohm speakers, making it ideal to support stereo speakers at the front of a room or mono speakers in the ceiling. The amplifier can also be used with Hi-Z (70/100 V) speakers, delivering 50 W.

The efficient design provides cool running operation to ensure long term reliability. The AMP-X50MP is high-density stackable with other Crestron X Series and Modular Amplifiers, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.

Installation and setup of the AMP-X50MP is simple. Detachable connectors facilitate the termination of wiring. Balanced and unbalanced inputs can connect directly to the line output of a video projector or display, audio processor, mixer, or AV switcher. Independent controls for volume, bass, and treble allow a custom sound in any location.

The AMP-X50MP features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line, both outputs mute automatically until the fault condition is resolved.

2 x 25 W per channel (1 x 50 W) into 4 or 8 Ohm speakers

1 x 50 W output for Hi-Z (70 V and 100 V) speakers

Balanced, unbalanced, and stereo 3.5 mm inputs with auto summing

Energy saving design reduces power consumption when idle

Highly sensitive audio-sensing circuitry with high-speed wake time

Convection cooled for noiseless operation

Quarter-Rack width for rack mounting with optional kit

60 W DC power supply with locking barrel connector and DC cable included

Captive speaker and power connectors for secure and robust connectivity

Electronic short-circuit and overload protection

Factory installed surface mount flange brackets are removable and reversible

Receivers & Amplifiers

1 Applied Filters:

CONTACT US

SOLUTIONS

INFO

FOLLOW US

LICENSE #

ASSOCIATIONS

Certified Programmer